Home > Flanges > Diesel Flanges
Sort By:
Page of 1
6.7 Hole Horn Flange Mild Steel 6.7 Hole Horn Flange Mild Steel

Not listed on MAYHEM SITE. 6BT-67-0014-SS

Price: $46.95
Turbo Diesel 6BT 5.9L 12 & 24 valve Custom Intake Manifold Plate (Factory square Turbo Diesel 6BT 5.9L 12 & 24 valve Custom Intake Manifold Plate (Factory square

Here we have a in house design for all 6BT Cummins 5.9 12 & 24 valve Diesel owners.These intake cover plates are CNC Laser cut from USA made 304 stainless steel for way superior quality and finish. These stainless plates will never rust, tarnish, crack, chip, or oxidize, EVER!!! No more polishing. These have shown no failures on our trucks at up to and beyond 100# of boost with no loss of boost pressure. Ever wonder why your charge tube pops off even when bead rolled with the best clamps at high boost pressures sometimes? It's because your stock cover plate with actually move and stretch under boost levels it was not designed to handle. (over 30#)These plates also allow you to relocated your MAP sensor and your boost gauge port closer to where the boost is actually effective. You could have 80# at the horn and only 65# in the intake plenum because of boost loss in a gasket, cracked flange your anything before the plenum.There is also plenty of room for injectors for water injection, NOS, or propane.These use the standard 8mm hardware that your intake accepts from the factory. We supply 304 stainless hardware (not shown in picture) with the plates which will work with the stock fuel rail and with our custom intake horn flange as a heater grid/block delete. This will also work with the stock heater grid and intake horn or any after market intake horn as well.They are shipped blank with mounting holes and the square factory heater grid style hole for the inlet.Our custom intake horn flange has a 3.005 hole which will accept all 3" tubing available and will work with this plate as well.With this listing you will get: 1- 304  Stainless steel cover plate with mounting holes and 3" intake horn hole 10- Short 304 Stainless socket head mounting bolts 4- Long 304 Stainless socket head mounting bolts for the mounting flange thickness you choose.*If you are not purchasing a flange we will not ship any bolts for the horn.These are available in 3 different thicknesses: 1/4" 3/8"*Common rail please choose this configuration so we can supply the 3 correct bolts for the fuel rail.Some reworking of the fuel lines will be required if using the stock fuel rail and lines with 3/8" plates.This style plate is available in 1/2" thick by special request only!!!! In house custom polish is available for 24.00 on this intake plate. Just select Yes! when adding to cart.

Price: $69.95
Cummins Turbo Diesel 6BT 5.9L 12 & 24 valve Custom Intake Manifold Plate (3.00" Cummins Turbo Diesel 6BT 5.9L 12 & 24 valve Custom Intake Manifold Plate (3.00"

Here we have a in house design for all 6BT Cummins 5.9 12 & 24 valve Diesel owners.These intake cover plates are CNC Laser cut from USA made 304 stainless steel for way superior quality and finish. These stainless plates will never rust, tarnish, crack, chip, or oxidize, EVER!!! No more polishing. These have shown no failures on our trucks at up to and beyond 100# of boost with no loss of boost pressure. Ever wonder why your charge tube pops off even when bead rolled with the best clamps at high boost pressures sometimes? It's because your stock cover plate with actually move and stretch under boost levels it was not designed to handle. (over 30#)These plates also allow you to relocated your MAP sensor and your boost gauge port closer to where the boost is actually effective. You could have 80# at the horn and only 65# in the intake plenum because of boost loss in a gasket, cracked flange your anything before the plenum.There is also plenty of room for injectors for water injection, NOS, or propane.These use the standard 8mm hardware that your intake accepts from the factory. We supply 304 stainless hardware (not shown in picture) with the plates which will work with the stock fuel rail and with our custom intake horn flange as a heater grid/block delete. This will also work with the stock heater grid and intake horn or any after market intake horn as well.They are shipped blank with mounting holes and a 3.0" hole for the inletOur custom intake horn flange has a 3.005 hole which will accept all 3" tubing available.With this listing you will get: 1- 304  Stainless steel cover plate with mounting holes and 3" intake horn hole 10- Short 304 Stainless socket head mounting bolts 4- Long 304 Stainless socket head mounting bolts for the mounting flange thickness you choose.*Common rail please choose this configuration so we can supply the 3 correct bolts for the fuel rail.Some reworking of the fuel lines will be required if using the stock fuel rail and lines with 3/8" and 1/2" plates.*If you are not purchasing a flange we will not ship any bolts for the horn.These area available in 3 different thicknesses: 1/4" 3/8" 1/2" In house custom polish is available for 40.00 on this intake plate. Just select Yes! when adding to cart.

Price: $69.95
TWIN!!! Cummins Turbo Diesel 6BT 5.9L 12 & 24 valve Custom Intake Manifold Plate TWIN!!! Cummins Turbo Diesel 6BT 5.9L 12 & 24 valve Custom Intake Manifold Plate

Here we have a in house design for all "Serious" 6BT Cummins 5.9 12 & 24 valve Diesel owners who want to get down and dirty!These intake cover plates are CNC Laser cut from USA made 304 stainless steel for way superior quality and finish. These stainless plates will never rust, tarnish, crack, chip, or oxidize, EVER!!! No more polishing. These have shown no failures on our trucks at up to and beyond 100# of boost with no loss of boost pressure. Ever wonder why your charge tube pops off even when bead rolled with the best clamps at high boost pressures sometimes? It's because your stock cover plate with actually move and stretch under boost levels it was not designed to handle. (over 30#)These plates also allow you to relocated your MAP sensor and your boost gauge port closer to where the boost is actually effective. You could have 80# at the horn and only 65# in the intake plenum because of boost loss in a gasket, cracked flange your anything before the plenum.There is also plenty of room for injectors for water injection, NOS, or propane.These use the standard 8mm hardware that your intake accepts from the factory. We supply 304 stainless hardware (not shown in picture) with the plates which will work with the stock fuel rail and with our custom intake horn flange as a heater grid/block delete. This will also work with the stock heater grid and intake horn or any after market intake horn as well.They are shipped blank with mounting holes and TWIN!!! 3.0" holes for the inletsOur custom intake horn flange has a 3.005 hole which will accept all 3" tubing available.With this listing you will get: 1- 304  Stainless steel cover plate with mounting holes and twin 3" intake horn holes 6- Short 304 Stainless socket head mounting bolts 6- Long 304 Stainless socket head mounting bolts for the mounting flange thickness you choose.Reworking of the fuel lines will be required when using this style plate.*If you are not purchasing a flange we will not ship any bolts for the horn.These area available in 3 different thicknesses: 1/4" 3/8" 1/2" (these are billet machined parts)

Price: $79.95
Cummins intake horn flange for 3.00" tubing Cummins intake horn flange for 3.00" tubing

Here we have a in house design for all 4BT and 6BT Cummins 3.9 and 5.9 Diesel owners.These intake flanges are CNC laser cut NOT stamped out of USA made rolled materials way superior quality and finish.Flanges starting at under 20 bucks can't be beat!!!!!This flange is available in the following materials: Mild steel 304 Stainless steel 6061 AluminumIt is also available in these thicknesses: 1/4" 3/8" 1/2" **Although anyone can use these, all 1/2" thick flanges are billet material and are highly recommended for boost levels of over 65#Please make your selections in the drop-down menu above.This flange is intended for use with or without the stock heater grid deleted for a custom fabricated intake hornIt comes with a standard 3.005 hole for use with any 3.00" tube and matches up with any of our custom intake cover plates.

Price: $19.95
03-12 Dodge CR Cummins Air Intake Temp Sensor Weld Bung 03-12 Dodge CR Cummins Air Intake Temp Sensor Weld Bung

2003 - 2012 Cummins 5.9 & 6.7 Air Intake Temp Sensor Weld BungMachined to aircraft precision specs and available in- 5053 Aluminum (perfect for polishing and or anodizing) 304 Stainless Steel 1018 Cold rolled Mild steel All weld bungs come with 18-8 Stainless steel mounting hardware. All American sourced material and made in the USA.

Price: $34.95